Aeroshell Oil 80 - 6 x 1 US Quart Bottles
This AeroShell Oil is approved for use in four-stroke (four-cycle) certified aircraft reciprocating piston engines (except Porsche) and other aircraft radial engines which use oil to specification SAE J1966 (MIL-L-6082) and which do not require use of an oil containing a dispersant additive.
AeroShell Piston Engine Oil 80 is used primarily during break-in of most new or recently overhauled four-stroke aviation piston engines. The duration and lubrication recommendations for break-in vary, so operators should refer to the original engine manufacturer and/or overhaul facility for specific recommendations.
It is possible to run engines permanently on straight mineral oils but, as straight mineral oils do not contain any additives, they tend to cause deposits to form in the engine. The "W" ashless dispersant oils contain an additive that is designed to keep particles separated so that they do not congregate to form a large mass. Elaborate precautions are not needed when changing from straight mineral oil to AeroShell W Oils, since both types of oil are compatible with each other.
Other AeroShell straight mineral oils are available, differentiated by a numbered suffix. The suffix for each grade corresponds to the viscosity of the oil at 99°C (210°F) in Saybolt Universal Seconds.
No reviews yet, please leave a review below
This AeroShell Oil is approved for use in four-stroke (four-cycle) certified aircraft reciprocating piston engines (except Porsche) and other aircraft radial engines which use oil to specification SAE J1966 (MIL-L-6082) and which do not require use of an oil containing a dispersant additive.
AeroShell Piston Engine Oil 80 is used primarily during break-in of most new or recently overhauled four-stroke aviation piston engines. The duration and lubrication recommendations for break-in vary, so operators should refer to the original engine manufacturer and/or overhaul facility for specific recommendations.
It is possible to run engines permanently on straight mineral oils but, as straight mineral oils do not contain any additives, they tend to cause deposits to form in the engine. The "W" ashless dispersant oils contain an additive that is designed to keep particles separated so that they do not congregate to form a large mass. Elaborate precautions are not needed when changing from straight mineral oil to AeroShell W Oils, since both types of oil are compatible with each other.
Other AeroShell straight mineral oils are available, differentiated by a numbered suffix. The suffix for each grade corresponds to the viscosity of the oil at 99°C (210°F) in Saybolt Universal Seconds.
Related Products