Order your SkyEcho 2 today and claim a rebate back of up to £250! until September 30th
Full details and conditions can be found here.
SkyEcho transmits your aircraft position, altitude, course and speed to surrounding aircraft to improve awareness. It includes FLARM and ADS-B receivers to receive position reports from other equipped aircraft .
This package includes a RAM window mount, charging cable and soft case.
Order your SkyEcho 2 today and claim a rebate back of up to £250 until September 30t!
Full details and conditions can be found here.
SkyEcho software is constantly being improved and update.Visit this link for updates
** ATTENTION: SkyEcho 2 must be RESET before AND after this software update (press and hold power button until LEDs blink white)
UK CAA now permits the use of SkyEcho2 ADS-B In/Out unit to transmit its position via ADS-B even in aircraft that have an operating mode A,C or S transponder
SkyEcho is a portable ADS-B IN/OUT transceiver consistent with the UK CAA's Electronic Conspicuity standard. SkyEcho transmits your aircraft position, altitude, course and speed to surrounding aircraft to improve awareness.
This package includes a RAM window mount, charging cable and soft case.
FEATURES:
ADS-B IN/OUT with FLARM Capability
SkyEcho includes FLARM and ADS-B receivers to receive position reports from other equipped aircraft and display them on in-flight applications, including ForeFlight Mobile, SkyDemon, EasyVFR, and AirMate.
See and Be Seen
UK CAA CAP-1391 allows light aircraft, gliders and balloons to see and be seen by other aircraft without equipping a traditional transponder.
Portable ADS-B
SkyEcho 2 is a portable ADS-B receive and transmit solution. With 20W transmit power, your 1090MHz ADS-B signal can be received up to 40NM away. Transmit functionality can be enabled or disabled depending on your flight location. The ADS-B receiver capability includes both 1090MHz and 978MHz UAT. Portable ADS-B transmit capability is currently only approved for use in the United Kingdom under CAP1391.
FLARM Reception Capability
Receive FLARM in the UK/EU natively with SkyEcho 2. When selected by the user, the UAT radio in SkyEcho 2 can be used as a FLARM receiver. FLARM traffic data is transmitted to participating EFB applications for display of FLARM traffic. SkyEcho 2 will translate the FLARM data onto your compatible EFB along with the ADS-B traffic.
Be Trusted with Certified GPS
SkyEcho 2 includes a TSO-C199 GPS transmitting a Source Integrity Level (SIL) value of 1. SIL values of one (1) enable certified avionics, TCAS, and ATC to process and display your aircraft position. Aircraft using uncertified sources transmitting SIL of zero (0) are typically discarded and not displayed by the avionics or ATC displays. The high-integrity, SBAS GPS with Fault Detection and Exclusion (FDE) also provides position data to the EFB application and correlates your position with received traffic for viewing on supported displays.
Integrated Altimeter
SkyEcho 2 includes an integrated baro altimeter. The altimeter correlates cabin pressure altitude to altitudes of nearby traffic to give you more accurate relative altitude alerts.
No Clutter Cockpit
The integrated SkyEcho 2 battery removes cords and clutter from the cockpit and has enough capacity for up to 12 hours of flight time with the transmit function enabled.
Connect wirelessly to SkyEcho and receive live traffic on your GDL90 compatible EFB or EFIS for up to 4 devices simultaneously.
TECHNICAL SPECIFICATIONS:
Operating Time 12 hours
Operating Power 3 watts
Size 57x82x30mm
Weight 120 grams
SDA/SIL 1/0 (TSO-C199 GPS)
Operating Temp -45 to 70¡C
TRANSMITTER
Frequency 1090MHz ±1MHz
Transmit Power 20W Nominal
Frequency DO-260B DF-18
RECEIVER
1090 Performance -93 to 0dBm
978 Performance -103 to 0dBm
WAAS GPS
Augmentation SBAS
Sensitivity -167dBm
ALTIMETER
Range -1000 to 60,000ft
INTERFACES
Wi-Fi 802.11 b/g/n 2.4GHz
4 simultaneous Connections
Ports USB-C
