Over 200 self-adhesive labels for use in the cockpit on one large sheet. Single placards can be cut out with either scissors or a modeller's knife along the thin dividing lines. It is wise to clean the instrument panel with methylated spirits to ensure good adhesion. These placards give the cockpit that professional look, the more common labels (e.g. on/off) are reproduced several times per sheet.
Packed with hundreds of invaluable self adhesive placards for your instrument panel. Including - On, Off, Taxi Light, Boost Pump, Rudder Trim, Cabin Heat, Prop, Pull On, Warning, Stall Warning, Primer, VNE, Release - and many more! Printed silver on black.

This pitot tube cover fits snugly over 5/8" pitot systems, found on Cessna 300 series, 400 series, Citation, and Conquest, Beech singles and twins, Piper Navaho and Cheyye, Mooneys, Mitsubishi, Lear jets, and Cirrus airplanes. Critical to safe operations, the cover keeps dirt, contamination, and insects from entering the pitot tube. A "remove before flight" streamer hangs off the cover as a prominent preflight reminder to pilots. The cover uses a heavy-duty plastic material; the 2" x 17" banner is bright red with white screen-printing for maximum visibility.

These are the finest Pitot Head Covers available and are conspicuous in design and colour and carry a long tail clearly printed on both sides "REMOVE BEFORE FLIGHT".

• Manufactured in deluxe weatherproof plastic they completely enclose the pitot head. Fastened by a velcro tab.

This Spyra-Base Semi-Anchorage System will hold down anything upto light jets and has a ratchet system for the tail, metal bar and has a holding capacity tested to 3 ton, suitable for all aircraft upto and including twins

1. Life Time Guarantee - all products are galavanised/zinc plated.
2. Reduce Hangar Fee Costs - The Aviator is an all year round product. Therefore the time spent on grass can be increased reducing high hangar costs.
3. Lloyds Tested - The Aviator System gives three point anchorage with one ton holding power (the Aviator Triple gives three tonnes).
4. Easy to Use - All systems supplied with simple instructions for quick set up.
5. Extra Security - Built in deterrent features include locking mechanism option.
6. Recessed Rings - The lashing rings are recessed, this allows the Aviation to be left in the ground saving precious time, allowing safe taxying and ground maintenance.

SPYRA-BASE TRAVEL KIT INCLUDES: 2 x 400mm Aviator Anchors 1 x 400mm Aviator Tail Spiral 2 x Lashing Rings 2 x Aviator Dampers 3 x Heavy Duty Strap/Ratchet 1 x Waterproof Aviator Holdall 1 x Steel Tightening Bar

The Spyra-Base Travel Kit is ideal for temporary use and is popular among light and ultra-light aircraft users. The travel kit spiral is manufactured from strong galvanised steel, designed for easy ground entry yet easily removed. Kit
Comprises of: 3 x 180mm Spiral 1 x Tightening Bar 2 x Wing Ratchet Straps 1 x Tail Rope 1 x Waterproof Bag