Works with both pin and petcock actuators and features a raised and magnified viewing area which allows close inspection of fuel contaminants.
Strong, clear butyrate plastic resists cracking and yellowing. Solid bronze rod actuator prevents breaking and pushing down.

The tester is supplied with an exclusive, removable splash guard to prevent fuel spillage and includes a hard-tempered reversible Phillips and slotted screwdriver bit.

• Measures 8 1/4" x 3 1/4"w x 1" h

This pitot tube cover fits snugly over 3/4" pitot systems, found on Cessna 150, 152, 172, 177, 182, 200 Series, Skymaster, and the Falcon jet. Critical to safe operations, the cover keeps dirt, contamination, and insects from entering the pitot tube. A "remove before flight" streamer hangs off the cover as a prominent preflight reminder to pilots. The cover uses a heavy-duty plastic material; the 2" x 17" banner is bright red with white screen-printing for maximum visibility.

This pitot tube cover fits snugly over blade-type pitot systems typically found on Piper Cherokee, Warrior, and Arrow aircraft. They are vented to prevent pressurization of the pitot-static system. Critical to safe operations, the cover keeps dirt, contamination, and insects from entering the pitot tube. A "remove before flight" streamer hangs off the cover as a prominent preflight reminder to pilots. The cover uses a heavy-duty plastic material; the 2" x 17" banner is bright red with white screen-printing for maximum visibility.

These bright red heavy nylon banners can be fastened to anything that needs removing before flight so that there is no possibility of forgetting! They are fitted with a grommet and wire ring that can be attached to everything from gear pins to gust locks and pitot covers.

This Spyra-Base Semi-Anchorage System will hold down anything upto light jets and has a ratchet system for the tail, metal bar and has a holding capacity tested to 3 ton, suitable for all aircraft upto and including twins

1. Life Time Guarantee - all products are galavanised/zinc plated.
2. Reduce Hangar Fee Costs - The Aviator is an all year round product. Therefore the time spent on grass can be increased reducing high hangar costs.
3. Lloyds Tested - The Aviator System gives three point anchorage with one ton holding power (the Aviator Triple gives three tonnes).
4. Easy to Use - All systems supplied with simple instructions for quick set up.
5. Extra Security - Built in deterrent features include locking mechanism option.
6. Recessed Rings - The lashing rings are recessed, this allows the Aviation to be left in the ground saving precious time, allowing safe taxying and ground maintenance.

SPYRA-BASE TRAVEL KIT INCLUDES: 2 x 400mm Aviator Anchors 1 x 400mm Aviator Tail Spiral 2 x Lashing Rings 2 x Aviator Dampers 3 x Heavy Duty Strap/Ratchet 1 x Waterproof Aviator Holdall 1 x Steel Tightening Bar

This standard set has a ratchet system for the tail, metal bar and has a holding capacity tested to 1 ton, suitable for typical GA aircraft like Cessna's PA28's etc.

1. Life Time Guarantee - all products are galavanised/zinc plated.
2. Reduce Hangar Fee Costs - The Aviator is an all year round product. Therefore the time spent on grass can be increased reducing high hangar costs.
3. Lloyds Tested - The Aviator System gives three point anchorage with one ton holding power (the Aviator Triple gives three tonnes).
4. Easy to Use - All systems supplied with simple instructions for quick set up.
5. Extra Security - Built in deterrent features include locking mechanism option.
6. Recessed Rings - The lashing rings are recessed, this allows the Aviation to be left in the ground saving precious time, allowing safe taxying and ground maintenance.

SPYRA-BASE TRAVEL KIT INCLUDES: 3 x 250mm Spyral 2 x Strong Strap/Ratchet (wings) 1 x Strap/Ratchet (tail) 1 x Canvas Zip Bag 1 x Steel Tightening Bar