The FA-B01AR is a Replacement standard flexible antenna for ICA22E and ICA3E

LC-122 Leatherette case with plastic clear window that fits nother the Icom A22E and Icom A3. Padded inside and made from atought lether and vinyl compound this will protet your Transceiver from light drops and knocks and scratches.

Requiring the OPC-478 (U) cable to connect to your receiver, this CS-R5 PC software installs into your PC allowing you to transfer data to and from your PC to your Icom Ic-R5 for cloning and memory programming. A new web site at Icomreceivers.com has just been launched that will allow you to download frequencies staright from the web, port them into this windows based software and then upload them into your Receiver.

The AD-92SMA is an Antenna connector adapter from SMA on radio to BNC female. This adapter allows you to connect a BNC type antenna to your IC-R5.

The OPC-474 cable is a cloning cable that allows you to share data from one receiver to another. It will work with virtually any Icom handheld and we have tested this with the IC-R5, IC-A3 and IC-A22E and can confirm this works fine. Please note, we have only tested cloning between two identical handheld types. ie: IC-R5 to IC-R5

The ICOM OPC-478U is a special USB serial interface cable kit that transfers data from your Icom IC-R5 to your computer via your PC's USB Socket. The kit includes the OPC-478U interface box, the OPC-1045 USB cable and a driver diskette. The OPC-478U can also be connected to a USB 2.0 port, however it will be transferring data in the USB 1.1 format. It is recommended that the OPC-478U not be used with a USB extension cable as data errors may result.

• When using the OPC-478U for the first time, while Windows is running, the "New Hardware is found" dialog box appears. In this case, the USB driver installation is necessary. Icom provides these drivers on a 3.5 inch diskette that is included with your OPC-478U. It features drivers for: Windows XP, Windows 2000 and Windows 98/ME environments.