CP-17L Cigarette Lighter Cable for ICOM A22/A3. For operation and charging with a 12 V cigarette lighter socket. Plugs directly into the side of an A22 or A3. It contains an internal safety fuse that can be changed if blown. Approximately five feet long. It will simultaneously charge the battery while the radio is turned on.

LC-122 Leatherette case with plastic clear window that fits nother the Icom A22E and Icom A3. Padded inside and made from atought lether and vinyl compound this will protet your Transceiver from light drops and knocks and scratches.

Requiring the OPC-478 (U) cable to connect to your receiver, this CS-R5 PC software installs into your PC allowing you to transfer data to and from your PC to your Icom Ic-R5 for cloning and memory programming. A new web site at Icomreceivers.com has just been launched that will allow you to download frequencies staright from the web, port them into this windows based software and then upload them into your Receiver.

The AD-92SMA is an Antenna connector adapter from SMA on radio to BNC female. This adapter allows you to connect a BNC type antenna to your IC-R5.

The OPC-478 cable interconnects your IC-R5, your Icom IC-A22E and your Icom IC-A3 to your PC. The OPC-478 cable has a 9-pin D-sub connector on one end, and a 3,5 mm jack plug on the other. The D-sub connector connects to a 9-pin serial port on your PC whereas the jack plug goes (originally) into the earphone socket of your IC-R10. Inside the D-sub connector a small circuit is built that converts the TTL-level data on the IC-R10's side to the RS232C-levels on the PC's side.

• Please note that the 3,5 mm jack plug and the earphone socket are stereo versions. One channel is used for audio and one for cloning data transfer.

This is the OPC-499 Headset adaptor with PTT socket for ICA22E and ICA3E. Plug your headset directly into your A22e or A3 transceiver, for use as a back-up to your aircrafts system.