The FA-B01AR is a Replacement standard flexible antenna for ICA22E and ICA3E

CP-17L Cigarette Lighter Cable for ICOM A22/A3. For operation and charging with a 12 V cigarette lighter socket. Plugs directly into the side of an A22 or A3. It contains an internal safety fuse that can be changed if blown. Approximately five feet long. It will simultaneously charge the battery while the radio is turned on.

The OPC-474 cable is a cloning cable that allows you to share data from one receiver to another. It will work with virtually any Icom handheld and we have tested this with the IC-R5, IC-A3 and IC-A22E and can confirm this works fine. Please note, we have only tested cloning between two identical handheld types. ie: IC-R5 to IC-R5

The ICOM OPC-478U is a special USB serial interface cable kit that transfers data from your Icom IC-R5 to your computer via your PC's USB Socket. The kit includes the OPC-478U interface box, the OPC-1045 USB cable and a driver diskette. The OPC-478U can also be connected to a USB 2.0 port, however it will be transferring data in the USB 1.1 format. It is recommended that the OPC-478U not be used with a USB extension cable as data errors may result.

• When using the OPC-478U for the first time, while Windows is running, the "New Hardware is found" dialog box appears. In this case, the USB driver installation is necessary. Icom provides these drivers on a 3.5 inch diskette that is included with your OPC-478U. It features drivers for: Windows XP, Windows 2000 and Windows 98/ME environments.

The OPC-515L is a simple DC lead for battery chargers that works with applicable chargers for the Icom IC-A22E and the Icom IC-A3 Transceivers