Over 200 self-adhesive labels for use in the cockpit on one large sheet. Single placards can be cut out with either scissors or a modeller's knife along the thin dividing lines. It is wise to clean the instrument panel with methylated spirits to ensure good adhesion. These placards give the cockpit that professional look, the more common labels (e.g. on/off) are reproduced several times per sheet.
Packed with hundreds of invaluable self adhesive placards for your instrument panel. Including - On, Off, Taxi Light, Boost Pump, Rudder Trim, Cabin Heat, Prop, Pull On, Warning, Stall Warning, Primer, VNE, Release - and many more! Printed silver on black.

This pitot tube cover fits snugly over blade-type pitot systems typically found on Piper Cherokee, Warrior, and Arrow aircraft. They are vented to prevent pressurization of the pitot-static system. Critical to safe operations, the cover keeps dirt, contamination, and insects from entering the pitot tube. A "remove before flight" streamer hangs off the cover as a prominent preflight reminder to pilots. The cover uses a heavy-duty plastic material; the 2" x 17" banner is bright red with white screen-printing for maximum visibility.

These bright red heavy nylon banners can be fastened to anything that needs removing before flight so that there is no possibility of forgetting! They are fitted with a grommet and wire ring that can be attached to everything from gear pins to gust locks and pitot covers.