Over 200 self-adhesive labels for use in the cockpit on one large sheet. Single placards can be cut out with either scissors or a modeller's knife along the thin dividing lines. It is wise to clean the instrument panel with methylated spirits to ensure good adhesion. These placards give the cockpit that professional look, the more common labels (e.g. on/off) are reproduced several times per sheet.
Packed with hundreds of invaluable self adhesive placards for your instrument panel. Including - On, Off, Taxi Light, Boost Pump, Rudder Trim, Cabin Heat, Prop, Pull On, Warning, Stall Warning, Primer, VNE, Release - and many more! Printed silver on black.

This pitot tube cover fits snugly over 5/8" pitot systems, found on Cessna 300 series, 400 series, Citation, and Conquest, Beech singles and twins, Piper Navaho and Cheyye, Mooneys, Mitsubishi, Lear jets, and Cirrus airplanes. Critical to safe operations, the cover keeps dirt, contamination, and insects from entering the pitot tube. A "remove before flight" streamer hangs off the cover as a prominent preflight reminder to pilots. The cover uses a heavy-duty plastic material; the 2" x 17" banner is bright red with white screen-printing for maximum visibility.

These are the finest Pitot Head Covers available and are conspicuous in design and colour and carry a long tail clearly printed on both sides "REMOVE BEFORE FLIGHT".

• Manufactured in deluxe weatherproof plastic they completely enclose the pitot head. Fastened by a velcro tab.

These light weight aluminium aircraft chocks are perfect for general aviation. Weighing only 8oz, these chocks will easily travel with you, and will not suffer from the effects of rain. You can adjust the length of joining cord to fit your specific aeroplane. Available in red. Measures 8 L x 1.5 H inches.