Requiring the OPC-478 (U) cable to connect to your receiver, this CS-R5 PC software installs into your PC allowing you to transfer data to and from your PC to your Icom Ic-R5 for cloning and memory programming. A new web site at Icomreceivers.com has just been launched that will allow you to download frequencies staright from the web, port them into this windows based software and then upload them into your Receiver.

The SP-13 Icom Earphone provides clear audio even in noisy environments. Fits any Icom handheld

Comes as standard equipment with a new IC-R5, this is simply a replacement antenna if you have lost yours. It is a ferrite rod antenna about 7" high.

The ICOM OPC-478U is a special USB serial interface cable kit that transfers data from your Icom IC-R5, A24 and A6 to your computer via your PC's USB Socket. The kit includes the OPC-478U interface box, the OPC-1045 USB cable and a driver diskette. The OPC-478U can also be connected to a USB 2.0 port, however it will be transferring data in the USB 1.1 format. It is recommended that the OPC-478U not be used with a USB extension cable as data errors may result.

---

• When using the OPC-478U for the first time, while Windows is running, the "New Hardware is found" dialog box appears. In this case, the USB driver installation is necessary. Icom provides these drivers on a 3.5 inch diskette that is included with your OPC-478U. It features drivers for: Windows XP, Windows 2000 and Windows 98/ME environments.

---