Over 200 self-adhesive labels for use in the cockpit on one large sheet. Single placards can be cut out with either scissors or a modeller's knife along the thin dividing lines. It is wise to clean the instrument panel with methylated spirits to ensure good adhesion. These placards give the cockpit that professional look, the m...

Printed on silver for maximunm clarity these self-adhesive aircraft decals enhance saftey and protect your aeroplane. Adheres to the external contours of the aeroplane. Weatherproof & fade resistant. ...

Printed on silver for maximunm clarity these self-adhesive aircraft decals enhance saftey and protect your aeroplane. Adheres to the external contours of the aeroplane. Weatherproof & fade resistant....

This pitot tube cover fits snugly over 3/4" pitot systems, found on Cessna 150, 152, 172, 177, 182, 200 Series, Skymaster, and the Falcon jet. Critical to safe operations, the cover keeps dirt, contamination, and insects from entering the pitot tube. A "remove before flight" streamer hangs off the cover as a prominent prefligh...

This pitot tube cover fits snugly over 5/8" pitot systems, found on Cessna 300 series, 400 series, Citation, and Conquest, Beech singles and twins, Piper Navaho and Cheyye, Mooneys, Mitsubishi, Lear jets, and Cirrus airplanes. Critical to safe operations, the cover keeps dirt, contamination, and insects from entering the pitot...

This pitot tube cover fits snugly over blade-type pitot systems typically found on Piper Cherokee, Warrior, and Arrow aircraft. They are vented to prevent pressurization of the pitot-static system. Critical to safe operations, the cover keeps dirt, contamination, and insects from entering the pitot tube. A "remove before flight...

Pooleys Pitot Head Covers are conspicuous in design and colour and carry a long tail clearly printed on both sides "REMOVE BEFORE FLIGHT". Manufactured in weatherproof plastic they completely enclose the pitot head. Fastened by a velcro tab....

These are the finest Pitot Head Covers available and are conspicuous in design and colour and carry a long tail clearly printed on both sides "REMOVE BEFORE FLIGHT". Manufactured in deluxe weatherproof plastic they completely enclose the pitot head. Fastened by a velcro tab. ...

These bright red heavy nylon banners can be fastened to anything that needs removing before flight so that there is no possibility of forgetting! They are fitted with a grommet and wire ring that can be attached to everything from gear pins to gust locks and pitot covers. ...