This AD-50 adapter sits into the BC119N charger and is a requirment to make the BC119N work. ...

The Ad-75, normally supplied fitted with the BC119N is available as a separate item in case of damge to te original. The Ad-75 Battery Charge Voltage Regulator sits inside the BC119N and allows you to fit a battery pack into the BC119N's charging socket....

Rotating type belt clip for Icom ICA24 and A6 Transceiver ...

Rotating type belt clip for Icom IC-R20 Wide Band Receiver allowing you to carry your radio hands free while walking...

This sofwtare for your PC allows you to transfer data to and from your receiver using the inlcuded USB cable. To run this set-up you need a PC of at least 500Mhz with a spare USB connector. The software allows memory contents such as frequencies, channel name, bank name, set mode items etc to be transferred. ...

This sofwtare for your PC allows you to transfer data to and from your receiver using the optional OPC478U USB cable. To run this set-up you need a PC of at least 500Mhz with a spare USB connector. The software allows memory contents such as frequencies, channel name, bank name, set mode items etc to be transferred. ...

Requiring the OPC-478 (U) cable to connect to your receiver, this CS-R5 PC software installs into your PC allowing you to transfer data to and from your PC to your Icom Ic-R5 for cloning and memory programming. A new web site at Icomreceivers.com has just been launched that will allow you to download frequencies staright from ...

The SP-13 Icom Earphone provides clear audio even in noisy environments. Fits any Icom handheld...

The HM-112 is a Remote Speaker and microphone. It includes a PTT switch which provides convenient lightweight operation while setting the transceiver in the cockpit or hanging it from your belt, etc....

Light-weight, open-air type monaural headphones. Gives you excellent received audio. Weight: 39.5 g; 1.4 oz., Cable length: 1 m; 3.9 ft ...

The Icom AD-101 is a BC-119N/121N charger adapter...

The OPC-474 cable is a cloning cable that allows you to share data from one receiver to another. It will work with virtually any Icom handheld and we have tested this with the IC-R5, IC-A3 and IC-A22E and can confirm this works fine. Please note, we have only tested cloning between two identical handheld types. ie: IC-R5 to I...

The OPC-478 cable interconnects your IC-R5, your Icom IC-A22E and your Icom IC-A3 to your PC. The OPC-478 cable has a 9-pin D-sub connector on one end, and a 3,5 mm jack plug on the other. The D-sub connector connects to a 9-pin serial port on your PC whereas the jack plug goes (originally) into the earphone socket of your IC-...

The ICOM OPC-478U is a special USB serial interface cable kit that transfers data from your Icom IC-R5 to your computer via your PC's USB Socket. The kit includes the OPC-478U interface box, the OPC-1045 USB cable and a driver diskette. The OPC-478U can also be connected to a USB 2.0 port, however it will be transferring da...

This is the OPC-499 Headset adaptor with PTT socket for ICA22E and ICA3E. Plug your headset directly into your A22e or A3 transceiver, for use as a back-up to your aircrafts system. ...

For carrying your IC-R20 receiver on your belt, this is a swivel type attachment allowing rotation through 45 degrees...

Allows you to carry your ICA24 or A6 Transceiver on your belt for convenience. ...