Auxiliary audio in and out lead, used for connecting MP3 player into radio interface or recording device to an Auxiliary audio out on radio interface. Used with a powered radio interface.. Please note the main airband radio has priority over the music, mobile telephone & second radio. If these devices are playing audio this wil...

Comes with fixing kit, new connector and 6meters of cable that can be cut to any length. Can be used with other makes of 3 wire strobe systems...

Features UL-100 Built in headset High performance electronics with user selectable Normal or Filter setting for a quieter headset. Built using a high performance low power audio amplifier, utilising surface mount components and an electronics speech processor to remove unwanted noise. The filter setting (user selectable) reduce...

Features UL-200 Built in headset Maximum performance for open and enclosed cockpit. Including ANR (Active noise reduction) and VOX. Built using a high specification low power audio amplifier, using surface mount technology, with an electronic speech processor to remove unwanted noise. ANR listens to the noise penetrating the ea...

Small 12 volt 1.2Amp sealed battery. Typically used for powering the item 1847 self contained strobe on Paramotors without a charging system...

Fits to the bottom of the helmet visor. Stops the cold wind from passing over the microphone creating clearer communication, also keeps you warmer in winter. Molded from tough ABS plastic. ...

Used with any radio interface this converts the standard twin jack plug to a single 3.5mm 4 pole jack (used with Icom A5, A23 etc). Cannot be used with Vertex VXA radios. ...

Jet flip type visor for direct replacement to our helmets, they will also fit many other make of helmets. The visor has a scratch resistant coating and a UV protective coating. The visor comes with a visor lock to keep the visor locked in flight and can also be fitted or retro fitted with the Micro Avionics ABS AirDam to keep...

Converts a Flycom style headset to work with Microavionics Microlight Headsets and powered radio interfaces. The adapter is also compatible with Lynx and Pilot Europe powered radio interfaces. Small ABS plastic box with flush mounted twin GA sockets that accept connection by any General Aviation headset. The ABS box contains ...

Converts a GA style headset to work with Microavionics Microlight Headsets and powered radio interfaces. The adapter is also compatible with Lynx and Pilot Europe powered radio interfaces. Small ABS plastic box with flush mounted twin GA sockets that accept connection by any General Aviation headset. The ABS box contains SMD ...

This is a Jet flip type visor for direct replacement on the Microavionics helmets which also fit many other makes of helmets. The visor has a 50% graduated half tint, a scratch resistant coating and a UV protective coating. It comes with a visor lock to keep the visor locked in flight and can also be fitted or retro fitted wi...

Will power one, two or three strobes. User can selest for upto 5 burst flash and the alternating and flash speed can be adjusted. Flash rate upto 300fpm. Input voltage 9-80 volts ac or dc. >BR>Size 80 x 60 x 50mmThe box is light weight aluminum. Can be used with other makes of 3 wire strobe heads....

Protect your helmet from damage. Quality headset/ helmet bag with rope drawstring plastic stop nut and carry handle. Screen printed with the MicroAvionics logo....

Only required if you use a Vertex VXA on a Type ‘B’ Powered Radio Interface. Used in conjunction with a Powered Radio Interface, converts the standard Type ‘B’ interface radio power lead to fit the Vertex VXA radios. ...

Used with any radio interface this converts the standard twin jack plug to a single 3.5mm 4 pole jack (used with Vertex VXA radios). Made for the VXA 100,120,150,200 and 210. ...

Twin Headset Charger with individual charging indicator. For charging one or two microlight or paramotor headsets. ...

A fully specified stereo paramotor headset. Designed to be worn under a MicroAvionics CE marked safety helmet. No other UK manufacture has all these features. User can configure to work on any radio. Auxiliary connection for: Stereo Music, Mobile Telephone, Stereo Audio Out, Second Radio, Remote PTT, Tandem intercom. The hea...

Press to talk switch for column or panel mounting with 2 meters of straight cable.This PTT Switch is a tactile switch (you feel a click when you press the button) and the switch comes with a stainless decorative steel dress nut. We recommend mounting on either the control stick or on the control panel....

Connects to the Powered Radio Interface. This will provide the capability to have a second VHF/ PMR band radio in the aircraft. The standard lead terminates to a twin 3.5 & 2.5mm jack plug. A CT44 adapter can be used to convert this to a single 4 pole 3.5mm Jack plug. To transmit on the second radio press the PTT on the secon...

High power strobe system. The strobe can be connected from 9 – 80v AC or DC volts. Ideally connected to AC volts for aircraft with little spare power output.   The power consumption is less than 500mA if connected to AC volts or 2 Amp connected to DC volts. The strobe can be set to give a 5 burst flash or adjust ...

Used to filter electrical interference from your radio. Connect the 12 volt ignition supply to any radio interface. This small unit rated at 1 Amp will plug directly into the radio interface. No terminating of wires needed. This unit can be supplied with bare wire to connect to equipment other than MicroAvionics goods...

The Microavionics Switching Adaptor is used when flying solo to switch on a single headset. Allows the headset to monitor engine noise. ...

Self contained electronics with onboard NIMH batteries giving over 100 hours between recharge (no re-charge is needed if using a powered radio interface). The headset uses a military specification noise canceling electret microphone designed for high noise environments coupled with a speaker that gives excellent sound qualities...

This headset has been specifically designed to work in open and enclosed cockpits with specific attention to noise reduction and clear communication. The headsets are compatible with our UL100 headsets, those of the Pilot and Lynx Avionics Micro system. The headset is fitted with ANR (active noise reduction) and VOX. ANR liste...

Typically used by instructors who move between aircraft and want to use their own headsets. The adapter joins two UL-100 microlight headsets directly to each other providing a direct intercom connection....

Tested & Certified to European Airborne sports standard EN966 and carries the CE Marking. The Microavionics Microlight Helmet is a composite helmet designed to be worn over a standard microlight/ ULM headset. The outer shell is made from composites and has an EPS shock absorbent liner with a webbing strap and quick releas...

Tested & Certified to European Airborne sports standard EN966 and carries the CE Marking. The Microavionics Microlight Helmet is a composite helmet designed to be worn over a standard microlight/ ULM headset. The outer shell is made from composites and has an EPS shock absorbent liner with a webbing strap and quick releas...

Available in Small, Medium, Large & XL sizes. Our helmets have been tested to EN966 standard and carry the CE marking. Manufactured by hand and finished to a very high standard made from composite GRP material. Helmets must be worn with a headset underneath. The AirDam is made from ABS plastic and is fitted to the bottom of th...

Generally used to interface a single or two headsets to an airband radio, the interface can also trickle charge the headsets if external power is used. External power is not required as the interface will take a supply from the headsets. Also separate auxillary audio in and audio out can be used to play CR music and record all ...

Stand alone strobe head, has no remote driver box. Runs off 12 volt DC. Power consumption 1/2 amp. 27 flashes per minute. Visible up to 2 miles away. Can be fitted to any trike or paramotor. There is a fixing kit included and the strobe has a side or fixing mount. 12 volt d.c. 500mA power consumption 10+ Joules Output 30 fl...